No Products in the Cart
For a special discount on bulk orders, email email@example.com
Cleans 1,560 sq ft (2 times per hour)
Meet the Erik 650A Air Purifier
We searched the world to build the Ultimate Air Cleaning Machine®. In Germany, we found the largest factory of high-performance motors, just like a Tesla engine. So, you get high performance and reliability with low energy usage. HEPA filters were invented in America and through engineering and rigorous testing in USA, we have improved the HEPA filters.
This Erik model air purifier has two filters – a 4” deep GAC impregnated activated carbon/potassium permanganate bed pre-filter and a 12” deep main HEPA filter. It is effective for a wide range of gases and odors.
SMALL FOOTPRINT AND MODERN DESIGN
With its tower design, the Oransi air purifier fits nicely in any room. We invested heavily in design to bring you a HEPA air purifier you are proud to show off and not hide behind the couch. In addition, we have removed wasted space to make it more compact and powerful than other tower air purifiers.
The attractive neutral color and cool contemporary design will match any décor. A conversation piece that blends nicely with your room.
The air purifier is optimized to remove airborne dust, pollen, pet dander, mold, and other solid airborne particles. Also features a carbon pre-filter to help with light odors. It’s the perfect air purifier for a bedroom or office. The Finn is designed for use in a single small square foot size room - ideally 400 square feet or less.
Placement - we suggest placing the air purifier in the room where you spend most of your time. For most this is a bedroom where the unit stays plugged in and runs 24/7 or whenever you are in the room.
Note: Be sure to open the cover and remove the installed filter from the plastic bag before operating the air purifier. If run continuously the HEPA Filter should be checked and cleaned if needed about every 1-2 months for best performance. Also, the air does shoot straight out of this air purifier. There are two fan assemblies inside the Finn that rotate around a vertical rod in the center of the air purifier and it's normal for it to shoot out one side. We designed this HEPA air purifier that way to achieve the maximum air flow. If we were to route the air so it exits the center or evenly it would result in lower air flow and more noise.
Easy to Use
Best Reliability and Quality
Tested in World Class Labs
Room Coverage: Most sized rooms up to 1,560 sq feet
Max Air Flow(cfm): 430
Power: 52W, 120V/60
Noise Level: 69.8 L(p)A db on high speed
Main Filter Life: 30 months (continuous operation)
Main Filter Rating: 99.99%+ (MERV 18)
Pre-Filter Life: 12 months
Dimensions: 25.5" x 26" x 12.75" (W x H x D)
Housing Weight: 48lbs
Pre-filter Weight: 5lbs
Main filter Weight: 10lbs
Total Weight: 63lbs
Total shipping weight: 75lbs
Warranty: 10 Years
Certification: UL, California Air Resources Board
THE BEST FILTERS
This Erik model air purifier has two filters – a 4” deep GAC activated carbon bed pre-filter and a 12” deep main HEPA filter. Effective for gases for smoke and gas leaks (methane gas, sulfur gases, and many others).
The main filter is the same industrial filter that is trusted by hospitals and removes much more than any true HEPA filter. Having more filter media means the main filter will last longer (2+ years) and it creates less air resistance. By not having to work as hard the motor can spin at a slower, quieter rate. These are the same filters used in Hospital Operating Rooms, Clean Rooms, the Nuclear Industry, Containment units, Laboratories, and Pharmaceuticals. Perfect for home use or commercial air purification.
Placement- we suggest placing the air purifier in the room where you spend most of your time. For most this is a bedroom where the unit stays plugged in and runs 24/7 or whenever you are in the room.
THE BEST MOTOR/FAN
Erik has the best, latest German engineered EC motor and fan so it provides higher air flow while being quieter and using much less power. The EC motor is a much-improved technology over the traditional AC motor that nearly every other air purifier uses.
AC motors use technology that was developed in the 1800’s and use more energy, can have an annoying hum, and are not as reliable. They are common because they are very inexpensive to produce.
EC MOTOR ADVANTAGES
EC (Electrically Commutated) motors use electronics to convert the AC voltage to DC to run the motor. EC is the latest technology innovation whereas AC motors use technology from nearly 200 years ago. With an AC motor from China, chances are that the copper was wound by hand and the ball bearings are of low quality making it unreliable.
Why does the motor/fan start and stop more slowly than an AC motor? EC motors have a soft start programmed into the motor to limit the start-up current the motor draws (there are electronics built into the motor). The ramp down after power is removed is only a function of the inertia of the fan and the friction of the bearing system. A high-quality bearing system will take longer to slow down and stop since the friction is minimized (alignment is better, lubricant is better, etc.).
MOTOR HUMMING 101
The humming noise comes from the fact that it is an AC motor and all the magnetics are changing intensity at the line frequency. When rotating, these forces are aligned so as to rotate the rotor. When the motor is not rotating or rotating at a speed lower than synchronous speed, they tend to make things vibrate back and forth and that makes the humming sound. If you have an AC motor that starts slowly, the humming starts louder and decreases as the rotor and field come into sync.
WHERE ARE THE KEY PARTS MADE?
BRANDS USING ORANSI
Oransi air purifiers are used by some of the leading companies, medical centers, government organizations and universities. We are delighted to be able to provide clean air to so many quality organizations.
Free Shipping on All Orders over $100
All items shown are available in our US warehouses
All medical items sold have FDA certifications
Contact us 8am-6pm, 6 days a week